-
When I replaced the previous broken F4V3 with a new F411 wing flight controller, I found that the TBS receiver Telemetry can only receive 10 basic sensor data. After studying issues on github(#6931 #5…
-
### 问题类型 / Type of issues
* 其它 / other
----
这是继 #3181 之后的又一次大扫除。请各位按列表检查自己名下的包，如果有意继续维护就勾选掉，如果不想管了、不记得了、好像没什么用了之类的，就留在那里。一个月之后还没有被勾选的包，我会发起 orphaning 流程。记得可以直接编辑留言，而不必用鼠标逐个点击。
包名后边的数字，「⬇️」…
-
`interval_log_likelihood()` throws this error when passed an observation outside of birdflow extent:
```
Error in x_to_col(rc[, 1], bf) : all(x
-
INAV 6.0 RC3 loses CRSF RC signal after Save is hit on Modes tab in configurator. Failsafe is not triggered, only power cycle restores CRSF RC input. Telemetry is not lost, only incoming RC data.
S…
-
I'm trying to hook up an ES900 RX receiver with the Eagle tree Vector FC, however the Vector only takes SBUS.
Probably most people are using iNav or Betaflight nowadays but it will be great to have r…
-
## Current Behavior
If you disarm a plane mid flight, iNav will not allow you easily rearm.
There is an option to prevent disarm unless throttle is zero (`disarm_kill_switch`), however - I just s…
-
## Current Behavior
I found a problem with Failsafe when nav_extra_arming_safety == OFF and RTH is enabled. Without GPS fix drone making fly away. It not safe flyting at home, buildings etc.. Its a d…
-
### ⚠️ This issue respects the following points: ⚠️
- [X] This is a **bug**, not a question or a configuration/webserver/proxy issue.
- [X] This issue is **not** already reported on [Github](https://…
-
It could be I just couldn't find it, but max throttle seems gone from the GUI.
You can of course fix it by setting max_throttle=2000 in the CLI.
This is just annoying since the default is 1850 v…
-
Hello Mstrens,
Firstly, many thanks for your great work.
I have already set up 3 sensors with Vario and GPS, they all work perfectly. Now I am trying to integrate a Hobbywing Fly Fun V5 ESC into a v…