-
Had an interesting behaviour on a X7 from a friend. Seems that Crossfire telemetry generate constant report telemetry lost/regained.
X7 running RC18 (no-heli, lua, diy module)
The behavior is si…
-
ACs:
1. Investigate how to operate MUX with 3 sensors
2. Investigate how to convert the LEDs to DCM equivalent sensor
-
I believe it is worth to present the recent features and release at [modelica.cz](http://modelica.cz/) - the upcoming Modelica Conference in Praha. The last paper was from [2009](https://modelica.org/…
-
Thanks to @sjoelund (#169) we now have initial support for AVR.
Probably there will be some comments and this issue can collect such things.
The first thing that I don't want to loose is the doc…
-
This is the last non portable instruction remaining in the SASIAE interface.
It is used in a loop to let the simulator synchronise the robot's task :
```
while(SASIAE::Aversive::sync()) {
// Do s…
-
Hey guys I'm working on an AVR microcontroller for the inverted pendulum simulation of pitch and yaw and my board is using 5V. Can the mosfet board handle that? I noticed in eagle that there is a pi…
-
Hi,
I am using a proximity sensor and temperature sensor connected to a arduino uno. When only one is connected they work fine and even when both are connected and proximity sensor has nothing in bet…
-
Just like most comment here this is not an issue but I like to get some input and give some feedback.
To play around a little bit I did mount a 2W blue laser+MOSFET to my ShapeOko+grbl and it is work…
-
I have mentioned some version of this before. Testing grbl can get a bit hard on your machine. Would be very useful to visualize machine jogging and homing moves. Ability to very simply represent your…
-
```
This is a place to collect ideas around our top feature request.
We are currently thinking of doing ERC as a first step (see issue 658).
The classical way to do this is to integrate SPICE:
http:/…