-
Add full-duplex (in+out) mode for I2S using PIO.
-
When running `hellow` through the simulator, the output when using gdb/OpenOCD/JTAG is:
```
HellHellHellHellHellHellHellHellHellCPU requested halt. Exit code 123
```
When dumping the memory fo…
-
According to Palmer;
> The NOMMU RISC-V port was posted to the Linux Kernel mailing list just this week
I think he is talking about the stuff at https://github.com/chmmn/riscv-uclinux
It would …
-
Have you considered porting to ngscopeclient?
https://www.ngscopeclient.org
-
### Port, board and/or hardware
Raspberry Pico
### MicroPython version
MicroPython v1.23.0 on 2024-06-02; Raspberry Pi Pico with RP2040
### Reproduction
I took my program code and stripped it dow…
-
I got my first Pico 2 boards the other day and found that the datetime RTC is not available anymore. So I modified the application to use the AON timer and that works ok. But with this the date of cre…
-
Hi, I have a spare empty 48+ case (no pcb and no membrane) and want to fit it with rp2040 (etc etc) and a custom made pcb with a tactile switch for each of 58 key of the 48+.
I can't understand how…
-
Edit: I first tried this on Windows but this is also failing on Linux platforms. So not a Windows-specific issue. It's the same error on Linux too.
---
I've tried with my own DIY toolchain and the…
-
The QtPy uses a neopixel and has no other leds. I also just flashed a ItysBitsy and it has both a normal led and neopixel. The led works as expected.
It looks like the neopixel logic is already wr…
-
On RPi OS Bullseye 32-bit, running `sudo make install` in the **picotool/build** folder installs the following files:
````
Install the project...
-- Install configuration: "Release"
-- Installin…