-
![DSC04058](https://github.com/geerlingguy/sbc-reviews/assets/481677/2c9d97cb-7d87-47cd-b59c-91c86f430d49)
## Basic information
- Board URL (official): https://milkv.io/mars-cm
- Board purc…
-
## 1.关于你要提交的问题
R4S 4G + USB网卡 A6210 MT76x2U WIFI 问题
Q:是否搜索了issue (使用 "x" 选择)
[x] 没有类似的issue
## 2. 详细叙述
R4S 配合 网件A6210 网卡做AP,
每次重启后路由器wifi 可以正常使用, 几分钟后 wifi 断线,重连提示密码错误,或无法加入
之前 5.10.78…
-
Hi,
I followed the last developments of the openwifi project with high interest and I have successfully started the new release Notter 1.4.0 by using the "zed_fmcs2-board" and the "zcu102_fmcs2-bo…
-
### Describe the bug
防火墙的硬件流量分载好像是默认启用的,但是好像并没有生效(测速时占用CPU),ppe的bind里也没有连接
```
root@ImmortalWrt:~# cat /sys/kernel/debug/ppe*/bind
root@ImmortalWrt:~#
```
在openwrt的main分支上硬件流量分载是生效的,测速时无CPU占…
-
### Prerequisites
* [x] Are you running the latest Master or the latest release version?
* [x] Did you try to reinstall EVOK?
* [x] Did you perform a cursory search on the [forum] and [google]?
…
-
Hello,
I have the following setup : Arduino ver. 2.2.1 / megaTinyCore ver. 2.68. ATtiny402 on breadboard without any other IC, 2 pull-up resistors with value 1K (I do not have higher value) to pin 4 …
-
The init script [S03gpio](https://github.com/halmartin/meraki-builder/blob/master/buildroot/board/meraki/ms200/overlay/etc/init.d/S03gpio) currently auto-configures the PD690xx for PoE. This allows fo…
-
Hi, I bought a dps5015 fairly recently from a distributor called "KKmoon" from Amazon EU, and I quickly put in opendps after I did some testing on the stock firmware.
Two problems as I can tell rig…
-
### Subject of the issue
I test my eprom 24C02 using Example1_BasicReadWrite.ino
### Your workbench
ESP32
### Expected behavior
the right size
### Actual behavior
I2C EEPROM example
Memo…
-
The 24cxx family i2c eeproms expect to receive the address of where you want to write before the actual data you want to write.
So we should be writing to i2c 2 elements (via src): address, data
…