-
**Running ```arv-tool-0.8 -d all``` gives following output:**
```
[14:01:02.472] 🅸 interface> Found 0 USB3Vision device (among 7 USB devices)
[14:01:02.473] 🅸 interface> [GvDiscoverSocket::new] Add…
-
TMC2209 V4.0 spider v3.0
I am getting Unable to read tmc uart 'stepper_x' register IFCNT
I have tried 2 diffrent jumper configs off the wireing diagram 1 on the PDN pin
also tried all 4 …
-
I got the Fystec PITB with the 2 BIG 5160s can board, got it working on can and everything works, fans rgb leds and whatnot but get this eror message when trying to move the x or y (what im using the…
-
Hello,
currently one can see the information for SolarEdge Home Battery 48V as a whole. Example - I have 9.2 kWh battery with 2x 4.6 kWh modules:
```json
"batteries": {
"Battery1": {
…
-
## Version of the custom_component
Latest from HACS
Home Assistant 2023.6.3
Supervisor 2023.06.4
Operating System 10.2
Frontend 20230608.0 - latest
## Configuration
```yaml
# Loads d…
-
Hey there, I have a flatpack2 (non-HE) 48v/2000.
I'm able to send a login message to 0x05004804 with the serial number successfully. After login, for 5 seconds I see messages come from 05014004 wit…
-
Hi,
Thanks for your OSF.
I notice that the display show a tension which increase proportionally with the power consumption of the motor.
For example, going without pedaling : 48v
If the motor is…
-
Can the parameters of "Battery current max" and "Battery power max" be explained more? What parameter is used with priority and when?
**Example 1:**
If I set:
Battery current max: 10A
Ba…
-
### NetBox version
v3.7.4
### Feature type
Data model extension
### Proposed functionality
Currently, it is possible to add custom fields to power ports and power outlets, but not to power port t…
-
Device Name: _TZ3210_uos3hl9x
Device Model: TS0502B
Device Description: 48v Track LED Light
Link to device image: https://www.uskyled.com/wp-content/uploads/2023/05/49301-fajpuz.jpg
Device Intervi…