-
# Raspberry Pi CM4 and Pin Compatible Modules | TinyComputers.io
Comparison of Compute Modules.
[https://tinycomputers.io/posts/raspberry-pi-cm4-and-pin-compatible-modules.html](https://tinycomputer…
-
### Creating an image request
#### Formal device information
- Device name | Orange Pi Zero 2W
- Official product URL | http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/service-a…
-
Hey,
I'm new to the field and I'm looking to put ARMBian on my box (I bought it only for that).
I thought my box was an h6 in fact no it's an h616 :(
I'm trying to figure out how to put Armbian o…
-
### 详细叙述
当我在 26pin 引脚中的 VCC GND SDA SCL 连接 oled 显示模块后运行 i2cdetect -y 0 输出如下:
$ i2cdetect -y 0
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- -…
-
see https://github.com/rust-embedded/aarch64-cpu
Cortex-A has good support in Rust Embedded already. We can build on top of that and port something like a Rockchip or Allwinner ARM SoC. See also #5…
-
As part of testing the fix for #79 I attempted to upgrade a BlikKVM v4 Allwinner.
First I updated the OS via SSH:
```
apt-mark hold linux-dtb-edge-sunxi64 linux-image-edge-sunxi64
sudo apt-get…
-
I designed an h313 board,I can use the sd card boot uboot and linux ,in linux i tested emmc driver it is ok 。it can work steadily for hs200,but when i use emmc boot,spl boot but uart print :
mmc_loa…
-
We want to use lpddr/ddr4 on h616, but the mainline u-boot does not support it, is there any other way than using sunxi-uboot?
-
I'm trying to compile - u-boot-with-spl.bin with the dtb that I extracted from the device, but when trying to do this it takes as a base other dtbs marked with an asterisk and the error below appears,…
-
firstboot.service is not working. There is no user in the system.
Possible solution: when creating rootfs you need to delete /etc/machine-id