-
```
Fatal error: Uncaught exception 'Exception' with message 'Datasource dbv1 has a source_type of performance_schema which requires mysql version >= 5.6. Found version: 10.0.19-MariaDB-2~wheezy-log' …
-
Fine Offset windspeed sensor may produce 4 ticks per revolution, not 2 as you assume.
It has a cunning magnet placement that operates reed switch twice per rev as discussed in.
https://cumulus.hosie…
-
Hi,
I think that the last 2 commits introduce this error.
Warning: session_start(): Cannot send session cookie - headers already sent by (output started at D:\SiteWeb\Anemometer\views\navbar.php:37)…
-
# Using Crontab to execute the script
I cannot get crontab to actually execute the script include the output into logging.
## How I run it.
I get the output myself – ``` > sudo python(3) counter.…
-
hey thanks for sharing your work!
I only connected the Davis Anemometer to the RPi4B Model and now it would be great to read out the wind data. Can you give me some advice on how to change your cod…
-
The IEC 61400-12-2 requires the length of the tube used during the anemometer calibration to verify whether if the installation of the anemometer is in line with the guideline's requirements. As a res…
-
When mounted to a ship, the fact that the ship is moving causes an offset on the anemometer readings. As such, need to subtract the ship velocity from the anemometer reading to get actual wind velocit…
-
```
Randoms glitches induced by the Davis anemometer reed relays or by the long
CAT5 cable length.
Need to incorporate a deglitching algorithm in the interrupt routine or try to
change the reed rel…
-
The currently returned wind speed is merely the speed at which the anemometer rotates. But there is of course a difference between the former and the latter, dependant on the geometry of the anemomete…
-
Placement:
* Can't place anemometer at top, because it would get in way of photonics.
* Can't really place it at bottom, because it would be affected by mounting rod
* Can't really place it in mi…