-
Hello, and first of all thanks for your great and useful library!
By compiling code containing reference to "SdsDustSensor.h" on Arduino IDE 1.8.42.0 using card "Arduino Nano 33 BLE" I get the foll…
-
Hallo,
The new Arduino Nano’s (Every, 33 IoT, 33 BLE and 33 BLE Sense) are using new MCU’s and are not compadeble with the current VarSpeedServo library. Will there be an update anytime soon?
Than…
-
The set of paths auto-included isn't sufficient for the Arduino Nano 33 BLE. The first missing include file is PinNames.h. I dutifully manually found and added all the right paths to c_cpp_properties.…
-
Board: Nano 33 BLE Sense
Version: GitHub Latest
Steps to Reproduce: Attempt to compile empty sketch onto Nano 33 BLE Sense with MozziGuts.h included
The issue seems to stem from the fact that Moz…
-
I am using your procedural_firmware_v9e.ino for reference to make an Arduino Version of this with SIM808 GSM chip aaand the commands don't really work.
I did it the same as you. I am translating the…
-
I noticed that the Nano 33 BLE was marked as compatible when it isn't on the following page.
https://www.arduino.cc/reference/en/libraries/flashstorage/
-
Arduino Nano 33 IoT (Arm® Cortex®-M0 32-bit SAMD21) support requested due to identical issues with Nano 33 BLE while using the onboard WiFi/BLE (u-blox NINA-W10) -> interrupt issues with standard meth…
-
**Describe the bug**
The trained model program (.ino) for Arduino, which is output after training with `Embedded image models`, cannot be written with current Arduino_tensorflowlite to Arduino nano 3…
-
1. Use BLE.setConnectionInterval(40, 40), the theoretical communication rate is 1/(40ms*1.25) = 20 Hz, but I test this funtion physically, its communication rate is actually only 10 Hz.
setConnection…
-
Recently Arduino team also added this Lib in their Page as V 1.3.1 and 1.3.0 . I uploaded the Encrypted Battery Monitor Example in my Arduino Nano 33 BLE Sense nrf52840. First, the Numeric Comparison …