netlabtoolkit VarSpeedServo issues

netlabtoolkit / VarSpeedServo

Arduino library for servos that extends the standard servo.h library with the ability to set speed, and wait for position to complete

GNU Lesser General Public License v2.1

291 stars 127 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Pedido

#51 fenixfz opened 1 month ago
0
When .attach of servo pin, swiftly servo goes that reduce servo-motor lifetime 😒

#50 shahfaisal-sust opened 1 year ago
0
Integrate with PCA9685

#49 Mr-Vulcan opened 1 year ago
0
does the speed value mentioned from 0-255 have any unit?

#48 Jasmin1708 opened 1 year ago
0
add support for Raspberry Pico

#47 peterwillcn opened 1 year ago
0
Create library.properties

#46 jjurski opened 1 year ago
0
acceleration/deacceleration

#45 BillyOnGitHub opened 3 years ago
0
add support for esp32

#44 discapacidad5 opened 3 years ago
2
isMoving implementation

#43 jerryg2003 opened 3 years ago
0
New feature 🙂- Arduino Simulation pages for the examples

#42 matititam opened 3 years ago
0
Como é que baixa essa biblioteca?

#41 sentemac1 opened 3 years ago
0
default position

#40 daddyben1 opened 3 years ago
0
Update for SAMD21

#39 Mark-Kenworthy opened 3 years ago
2
Starting point

#38 Giochia opened 4 years ago
0
Different ATmega speeds

#37 mergdavy opened 4 years ago
1
sequencePlay function only playing 1st position point

#36 Dirk275 opened 4 years ago
2
README.md out of date

#35 dpharris opened 4 years ago
0
Not an Issue but an Example suggestion --> Multi-Serial Position and Speed

#34 ghost opened 4 years ago
0
Library update for Arduino Nano 33 IoT and 33 BLE?

#33 Bjerg13 opened 4 years ago
3
Removed default pulse width

#32 PRITI24 opened 5 years ago
0
Fix initial move of servo motor

#31 sapics opened 5 years ago
2
Fix typo and spaces

#30 sapics closed 5 years ago
0
Add initial position argument to attach function

#29 ghost closed 5 years ago
0
Error compiling for board Arduino/Genuino Mega or Mega 2560

#28 DrAlanHenry closed 6 years ago
2
VarSpeedServomk.h

#27 MKharul closed 6 years ago
0
VarSpeedServomk.cpp

#26 MKharul opened 6 years ago
0
Update VarSpeedServo.h

#25 pritijha2224 opened 6 years ago
0
Can I use this with 17 servos at a time

#24 zaindroid closed 6 years ago
1
sequencePlay

#23 jgilgan opened 6 years ago
0
Servo not waiting until move complete before executing another move

#22 a-hodgson opened 6 years ago
3
Use correct separator in keywords.txt

#21 per1234 closed 6 years ago
0
Is there any pins specified that i have to use with this servo?

#20 AshrafAkon closed 3 years ago
2
isMoving can't return "false"

#19 andreas-seiderer closed 6 years ago
2
servo.wait() method not working

#18 GownerCode closed 6 years ago
1
I am very new to this

#17 cgdreier opened 6 years ago
1
gcc - warning: comparison is always true

#16 ldpgh closed 6 years ago
1
how to use on atmega1284P

#15 bnm890 opened 6 years ago
1
Motor Reset when I use attach function.

#14 gargakshit opened 7 years ago
12
how to control writeMicroseconds speed

#13 bnm890 opened 7 years ago
0
Added new feature to sync movement of more servos

#12 GillHawk closed 7 years ago
0
wait for the end of the movement of two servo?

#11 jaytonic closed 7 years ago
8
Ardunio.uno 1.65

#10 foxy65 opened 8 years ago
0
Add support for ESP8266

#9 marcelogaio opened 8 years ago
10
added a static refresh_flag that is set to 1 at the start of the refr…

#8 P33a opened 8 years ago
0
Motor won't change direction when using VarSpeedServo.h

#7 HaziqNajee opened 8 years ago
0
ISR ptr cache

#6 sacnorthern opened 9 years ago
0
Error: 'cli' was not declared in this scope

#5 frodo1986 opened 9 years ago
1
define maximum angle

#4 DrSensor opened 9 years ago
1
define maximum angle

#3 DrSensor opened 9 years ago
1
Add support for more than 8 servos if possible

#2 pvanallen opened 9 years ago
2