-
---
Migrated from https://github.com/jadonk/beaglebone-blue-jadonk/issues/28
Originally created by @jadonk on *Wed, 12 Oct 2016 20:37:33 GMT*
---
This would be to assist in new users locating specif…
-
---
Migrated from https://github.com/jadonk/beaglebone-blue-jadonk/issues/46
Originally created by @adanmaa on *Wed, 26 Apr 2017 23:39:56 GMT*
---
Had this board for a day. Powered it on and opened…
-
### Expected Behavior
Plugging in USB or 12V barrel jack power supply to BeagleBone Blue (BBBL) should
1. Enable the user LEDs;
2. Turn the "ON" LED on;
3. Be recognizable by Windows (if plugg…
-
I'm running a program which drives two motors on M1 and M2 ports on beaglebone Blue.
This program has run today multiple times, and has errored out the last two times. No hardware changes were ma…
-
When running `rc_test_dmp -t` after calibrating, the Z axis value will slowly increase over time.
Running on a BeagleBone Blue and Debian 9.5 2018-10-07 4GB SD IoT
-
Hello, I have been trying to get the Robotics Cape working on the Beaglebone AI. As I understand it, the device tree that the RC control library uses, is not able to be used with the AM5729 that the B…
-
Hi Mirkix!
I'm not sure if this is the right forum for this. I have followed these directions over and over for the last 4 months, so this is not without really trying to make your directions work…
-
**IF YOU DON'T REMOVE THESE FOUR LINES, THEN YOUR REQUEST WILL BE CLOSED AUTOMATICALLY**
Questions and user problems should be directed at the forum (http://discuss.ardupilot.org)
_**Please do a car…
-
I'm working on a BeagleBone Blue running the latest image (2018-10-7) suggested in the Strawson online manual, flashed to onboard storage.
I've started getting frequent crashes working in python, c…
-
## Bug report
**Issue details**
No FrSky telemetry appears to emit from the serial port on Beaglebone Blue.
The serial port appears to work correctly. Queries from the FrSky RX arrive, but AP…