-
Hi, me again.
Since I own a working 1541, I was wondering if I can copy files onto physical diskettes from d64s using the Uno2IEC as a source drive. Given standard floppy format it *seems* possible. …
-
Hello,
I've built your adapter. But I have an issue with the eprommer that prevent me to use both the eprommer and the eprommer with the 512k extension.
I know that you have nothing to do with t…
-
There are multiple file types for C64 tape images; namely .tap and .t64
These file types are different, but both represent tape-stored data as opposed to disk/cartridge.
While BizHawk supports…
-
All the online sources I've found indicate that the 1541 (at least as used by a C64) only used the first 35 tracks of the disk.
When dumping my own disks, they all seem to "fail" on tracks 35-40:
…
-
Thanks very much for the effort put into this project! I'd like to contribute some feedback on a documentation issue I ran into, and doubtless will cause headaches for other newbies like myself who w…
-
I have a short and longboard C64 both with your SKS64 solution, and both are working fine (ATTINY85, Firmware 1.6 in combination with an RGB LED).
Because I also own a 1541C drive I tried installin…
-
I Created a PI1541 from the following page: https://cbm-pi1541.firebaseapp.com (option A)
However it is not working correctly, when listing a directory in the "sd2iec mode" it all works perfectly,…
-
MIDI in and or out support would be great, some trackers support MIDI to various extents.
**This issue is primarily for gathering requirements and documentation**
# Introduction
There are a …
-
Hi !
Is there a BOM for the little Sixteen V3 Board available ? I ordered some Boards but could not find a BOM yet.
Greetings
Mathias
-
Tried invain to make a working SD card for my Raspberry Pi3B+ (2017). Never boots. Pi is okay running with original Raspberry Pi boot image.
Gave up on trying because it never works on my Pi3B+ wi…