-
Hello
I have an non working HDMI module from an early Inspire1 Remote
Which was long not used and so NAND run full of bad blocks. Was my First thought.
Board is labeled "WM610_GRCP_MFI368_V1"
…
-
- [x] ~Cypress CY7C68013A-56LTXC QFN-56 (#15)~ (footprint merged in ~2 months, 3D package merged in ~2 months)
- [x] ~ON Semi CAT24C256WI-GT3 SOIC-8 (#16)~ (symbol merged in 30 minutes)
- [x] ~O…
-
There is an offset between the vertical position of the trace and the channel marking CH1 in DDS120, please see screenshot, this might be related or be the same as bug #39 but it is already closed.
I…
-
Speed from libusbK.
Idealy the speed should be 12MB/sec for the high bandwidth high speed Interrupt IN/OUT endpoint when bInterval = 2 (250us).
3072 B / 250 us = 120,288 Bytes/sec.
```
PS C:…
-
There is an example device for hidraw from umockdev project. Maybe we can integrate it for CI under Linux.
https://github.com/martinpitt/umockdev/tree/main/devices/hidraw
-
smbusb_scan -a only seems to work until it finds my controller (bq8030), after that it always comes back with ERROR -9.
First scan:
`------------------------------------
smbusb_scan
…
-
I tried buck50 on two classic bluepill modules, on one lctech module (also stm32f103c8t6) and on a stm32f103vet6.
Connection via USB is not working (no device on host side). I tried to debug with a b…
-
Hi guys.
Recently I got my hands on a clone of USBee-DX device. This is combined logic analyzer and oscilloscope.
I was hoping to make it working under Linux with Sigrok PulseView software, but unfo…
-
Having a non-standard version of sigrok pulseview makes no sense if people use it with other devices. There is no guarantee this version will keep up and it will likely not include evolving devices …
-
**Describe the bug**
I'm getting severe timing jitter on Fedora 34 (kernel 5.13.9-200.fc34.x86_64) causing the signal to be completely corrupted on higher timebases (>=1ms) - I'm trying to determin…