-
**Firmware**
```python
Adafruit CircuitPython 6.2.0 on 2021-04-05; FeatherS2 with ESP32S2
```
**Code/REPL**
```python
import time
import board
import displayio
time.sleep(…
-
### Environment
* Mustang 0.6.4
* Mac (unsure whether Intel or ARM and which OS version)
### Reproduction
1. Start Mustang, set up existing email address
2. Log in with GMail address
3. -> O…
-
The current example uses chemical/subparagraph, but there are various other of levels from the [BNF hierarcy](https://www.thedatalab.org/blog/161/prescribing-data-bnf-codes/) that could be used in com…
-
Given that the CGG1 is using an unknown display controller, we need to capture and try to reverse engineer the communication between the MCU and the display controller. As a first step, it will also b…
-
I am try to drive epaper with esp8266,
but failed...
### Hardware
- ESP 8266 C2102
- waveshare epaper 2in13
### Code
- main.py
``` python
import epaper2in13
from machine import Pin,…
-
Hi there,
Running a really simple python script (display elapsed seconds) on a PiZero with the PaPiRus Zero. I have it updating the screen using partial updates, and have it looped so that every 5…
-
Any kind of guru meditation error (like the framebuffer crashes in issue #4 ) kills micropython and makes it unresponsive even with multiple power cycles until I physically unplug the SD card adapter …
-
Tried running RasPi epd1in54b demo for V1 display.
Red color is very dim, almost invisible. If I draw the same framebuffer as both red and black the picture gets better, but it's still nowhere near…
-
Hello,
please find attached a set of debian files, to create debian packages for the V230_G2 and the EPD.py file. The patches (found in debian/patches) improve the Makefiles to support DESTDIR (insta…
jlaba updated
8 years ago
-
Hi, i have used the arduino upload command to specific sectors,but then even if the serial monitor shows the read="sth", but when i try to display it out from the specific sectors, it shows empty(blan…