-
Thank you for your code,
I use it and start my project based on your code.
Now that LVGL V9 is out, I wanted to start to use it, but it is over my head to make the needed changes to adapt it to …
-
Hi,
Great job on putting this together, so I was very hopeful when I started with this library. However, I have the 4.3inch version of the 800x480 display instead with a capacitive touch screen. Th…
-
I was going through the pin mappings for the SDcard I/F on the 7" and 4" 800x480 displays (ESP32-8048S043-C and ESP32-8048S070-C) and noticed that they do not comply with the schematic for these boar…
-
### Port
ESP
### Target chip
ESP32-S3
### Hardware Configuration
ESP32-8048S043
### Log output
```plain
connect to target failed (because no physical connection yet)
```
### More Information
…
-
hello,
Thank you for your sharing
I tested your code and it does not compile, what version of IDF are you using? I tested with IDF5.1.1
`Call Stack (most recent call first):
C:/Espressi…
-
Hi.
Im new with this device and after lot of hours rounding around, im unable to understand how to make run this. Can you, please, give me the first steps about how to setup the folders and how to st…
-
Hey there! Thanks for this amazing demo, it's very useful!
Have you ever tried to run this with Wi-Fi together?
I need to be able to connect to AP for OTA updates, but I've been stuck for quite…
-
Thanks a lot for this getting startet guide. It works and I can see the demo on my board running!
Could you maybe support with another version including a basic working Squareline GUI (simple butt…
-
**Carefully written Issues are more likely to be given priority.**
**丁寧に記述された報告は優先して対応される可能性が高くなります。**
**Hi, thanks for providing this library it's a great resource for the DIY community!!!**
#…
-
**Carefully written Issues are more likely to be given priority.**
**丁寧に記述された報告は優先して対応される可能性が高くなります。**
## Environment ( 実行環境 )
- MCU or Board name: ESP32-4827S043) [ESP32s3 + 4.3" RGB display]…