-
Hi, would it be possible to make a firmware for DIFI on the ettus X310?
-
**Feature description**
The UHD/USRP code by default applies DC removal. This causes problems when using "center tuning" on AM
stations. Basically it causes the carrier to be removed and demodulati…
-
## Issue Description ##
## Setup Details ##
## Expected Behavior ##
## Actual Behaviour ##
## Steps to reproduce the problem ##
## Additional Information ##
-
## Issue Description ##
## Setup Details ##
## Expected Behavior ##
## Actual Behaviour ##
## Steps to reproduce the problem ##
## Additional Information ##
-
## Issue Description ##
Occasionally, and non-deterministically, I see the following warning:
> [WARNING] [RFNOC::GRAPH] One or more blocks timed out during flush!
The weird part is t…
-
Hi, Alex.
I miss the ability to select the external reference on Ettus.
This must be easy to implement, like in "antenna selection"
Luis.
-
Hi,
can someone help me?
I would like to use Ettus B100 with OpenWebRx.
![bildschirmfoto 2016-11-13 um 16 52 50](https://cloud.githubusercontent.com/assets/15073276/20246933/cac9176a-a9c1-11e6-…
-
Hi,I'm using a receiver x300 and ubx with 12.5MHz center frequency, 25MHz sample rate and GPSDO.
thor.py -m 192.168.10.2 -d "A:0" -y "TX/RX" --clock_source 'gpsdo' --time_source 'gpsdo' -c ch1 -f 1…
-
## Issue Description ##
When using DPDK, initialization freezes if `dpdk_corelist` does not contain lcore 0.
The program does not give any information about the cause of the problem.
…
-
First of all, many thanks this great port!
## Issue Description ##
I'm trying to make the bitstream, but the design fails to meet the timing requirements by around 80 ps. Most of the paths are int…