-
With qgis 3.34.10 and up-to-date Contour plugin, I asked for contours from gpkg layer that has a "3D Measured Point" geometry column and a fid, and nothing else. (These are observations from an RTK …
-
I'm no coder but I see your code uses "gnss.h". Does this mean that you can utilize a connected GNSS receiver as well? I don't see GPS support in the documentation anywhere. Can you elaborate on this …
-
Hi,
I used GNSS-SDR to process the BDS data collected by the Spirent GSS6450 signal record system. I then used RTKLib to obtain a zero-baseline RTK solution with BDS B1I measurements only. The refe…
-
It seems that when external GPS receiver is connected to device, we are not receiving updates for vertical accuracy and number of used/viewed satellites.
These informations should be coming from Q…
-
I'm trying to get coordinates with GNSS-SDR (next branch) and PlutoSDR as source of signal. But there is always Loss of lock in channel after few Seconds.
I'm using below Configuration file for Plu…
-
I used a computer, usrp2922, and an active antenna to run GNSS SDR. I followed all the procedures on the official website, but after locking, there is always a situation where the lock is lost. I woul…
-
## Feature request
Implement GNSS constellation configuration for UAVCAN receivers
**Describe the solution you'd like**
The same principle as for serial connected GNSS receiver
**Platform**
…
-
I have built test setup for RTL-SDR mentioned in GNSS-SDR's web page.
[https://gnss-sdr.org/docs/tutorials/gnss-sdr-operation-realtek-rtl2832u-usb-dongle-dvb-t-receiver/](GNSS-SDR)
I have used an …
-
When examining the "dump" from the GPS_L1_CA_DLL_PLL_Tracking loop, I have noticed that there is an offset in the accumulated carrier phase (acc_carrier_phase_rad) compared to the carrier phase of the…
-
**Is your enhancement proposal related to a problem? Please describe.**
There are several aspects of the GNSS API which appear under-defined to me.
Time and location are two concepts where the dev…