-
I have a split unit with 2 inside units, both coupled as a climate device. It would be great to be able to just add them to BT as a combined heating/cooling device. I think just adding an option to be…
-
Hi,
Thanks for this amazing apps.
I realise that current temperature is not updating automaticaly. To check it, I have to modify the desired temp and then current temp is changing.
How can I d…
-
I flashed the latest development build yesterday. The device is connecting to the EMS bus and I see the entities coming back from my
heating system. After couple seconds there might be a reset and it…
-
Like most people, i run a CPAP cooler as well as aux parts cooling and interestingly and i suppose not suprisingly the rscs aux fan provides more cooling than the CPAP. (22.2W for the the CPAP and 26.…
-
Hello
I'm using the latest version of Myvaillant.
When the outside temperature passes a threshold set in the thermostat (TE cut-off threshold), the heating is switched off, the set temperature drops…
-
In GitLab by @skahn on Feb 18, 2021, 15:45
## Description
The sliding joint resitive heating was wrong.
Instead of joints in //
``` fortran
! Sliding joints resistive heating
! -…
-
a) Hello, in the ```cellulosic model```, the temperature and pressure of ```low-pressure steam``` seems to be higher than the temperature and pressure of ```medium-pressure steam and high-pressure ste…
-
### Checklist
- [X] I have updated to the latest available Home Assistant version.
- [X] I have cleared the cache of my browser.
- [X] I have tried a different browser to see if it is related to my b…
-
There are times when you need the Heating/cooling to stop without affecting the Domestic Hot Water production -> therefore you cannot use power off.
One practical case is that even if you set up a de…
-
Following the issues with #238 we could experiment with initialisation of `pathfinder`.
I've had success with pre-heating the pre-heating of `pathfinder` but doing a sequence of tempered MAP optimi…