-
[See this exception on Errbit](http://errbit.opensuse.org/apps/5620ca2bdc71fa00b1000000/problems/627f865a84bf460539e62c3d)
# Mysql2::Error: Data too long for column 'payload' at row 1 #
## Sum…
-
This may be a hardware fault, but I'd appreciate your kind advice.
I've purchased an M5Stack Core2 to run your brilliant Icom software with an IC-705. I used M5Burner to install M5HamRadioCore2 an…
-
ICOM機のCI-V制御で、コマンド送出後、FB(OK)/FA(NG)応答を待つことにする。
-
I can't get this to work. It just fails to read the ini file. I initially thought it was the 32GB card but I tried another, also formatted to fat32 that was only 2 Gb and the same. This is on the M5S…
-
**Describe the bug**
Trying to transmit a Morse message in the Morse TX application with "CW" modulation. The transmitted signal is simply a single tone/carrier, there is no modulation. In FM mode ev…
-
Posted this as an issue because I wasn't sure how else to ask this question. Are there plans to support the IC-7610 and other Icom radios in the future? Also for radios such as the IC-9700 and the IC-…
-
Testing #194 with a (new to me) IC-705 and I'm currently unable to get CAT control working on macOS. Based on the debug output, Hamlib seems to be forcing /dev/ttyS0 regardless of the configured seria…
-
I am receiving an error message with Mobilinkd and Pat Winlink. The error message "no AX.25 no ports configured" is displayed when trying to connect to RMS gateways.
When using Build-A-Pi on Rasbi…
-
Running on a Pi 4 with hamlib 4.3 installed. Everything worked ok on Icom 1.24 firmware. After upgrading the radio firmware to 1.26, I am having issues. Here is one example where I am simply trying to…
-
Many thanks for the great project! I am putting together a compact and portable rig. That is what I was missing.
Can please add the schematics? I'd like to understand how this works. Also its not c…