-
We are using openhpi to get some IPMI OEM sensor types from the HW. According to the IPMI Spec the OEM sensor type range is C0h-FFh.
Intelligent Platform Management
Interface Specification
v1.5
…
-
Versions:
openbmc: 18caa97591
phosphor-host-ipmid: 68e82947f6
Platforms:
QEMU ast2600-evb & ast2500-evb
Description:
Enable the dynamic-sensors option in phosphor-ipmi-host_git.bbappend:
PA…
-
Most ipmi functionality (sensors, console) are nested within node; but power is on its own. It should be nested under node as well.
wwctl power should be retained as an alias for now.
-
We are using openhpi to get some IPMI OEM sensor types from the HW. According to the IPMI Spec the OEM sensor type range is C0h-FFh.
Intelligent Platform Management
Interface Specification
v1.5
Docum…
-
IPMI does not display power sensor value correctly.
IPMI displays zero for Lower Critical , Lower Non-Critical , Upper Non-Critical and Upper Critical while for the same sensor IPMI display s…
-
I used ipmitool -I lanplus -H IP -U USER -P PWD -l 3 sdr get "SDR_LUN3", but it cannot return the correct sdr of LUN3.
I checked ipmi_sdr.c (ipmitool-1.8.18\lib\), ipmi_sdr_find_sdr_bynumtype() did…
-
A good feature would be to be able to access sensor parameters and control some other features of the board via command line (USB serial) rather than only by IPMI messages.
A good candidate is [Fre…
-
We are using openhpi to get some IPMI OEM sensor types from the HW. According to the IPMI Spec the OEM sensor type range is C0h-FFh.
Intelligent Platform Management
Interface Specification
v1.5
Docum…
-
While running a loop reading DIMM sensors via opal-i2c driver and other sensors via in-band IPMI it is easy to trigger I2C timeouts and IPMI timeouts by attempting to read /dev/mtd0:
```
fden2…
-
This is a request for discussion.
We currently have these IPMI extensions:
https://github.com/openbmc/phosphor-pid-control/blob/master/ipmi.md
We should have Redfish equivalents for these, fo…