openbmc phosphor-pid-control issues

openbmc / phosphor-pid-control

OpenBMC PID-based Thermal Control Daemon

Apache License 2.0

14 stars 21 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Make IPMI OEM commands optional feature

#43 Kostr opened 3 months ago
0
Support Name field as primary thermal zone identifier and deemphasize Zone Index number

#42 Krellan opened 8 months ago
0
Supports multiple fail-safe modes

#41 averyzlyang opened 8 months ago
3
Individual fan control of automatic/manual status would be nice

#40 Krellan opened 9 months ago
0
_maximumSetPointNamePrev becomes unnecessary when _maximumSetPointName gets cleared in every loop

#39 huangalang opened 11 months ago
5
Add standard PID algorithm for SIE and Raptor systems

#38 madscientist159 closed 1 year ago
2
Should we use property "isCeiling" to specify zone ceiling support instead of "Class"?

#37 blackcatevil opened 1 year ago
1
[proposal] set failsafePwm by pid configuration

#36 huangalang closed 1 year ago
2
Work around flakiness by periodically issuing redundant write commands to fan

#35 Krellan opened 1 year ago
2
Set a fixed fan PWM as transitional mode at service startup and terminate

#34 potinlai opened 1 year ago
5
Startup behaviour if sensors missing is inconsistent and unreliable

#33 Krellan opened 1 year ago
1
Allow RPM to be sent directly to hardware, having no fan PID loop

#32 Krellan opened 1 year ago
8
Allow objects (sensors, loops, zones) to be designated as non-essential and quietly skipped over if missing

#31 Krellan opened 1 year ago
3
Sometimes return "Connection timed out" when set auto mode continuously

#30 harveyquta opened 1 year ago
5
proposal: MaxError activated PI control

#29 huangalang closed 1 year ago
1
proposal: Stepwise controller with more computation type and moving average process

#28 huangalang opened 1 year ago
2
Add D-Bus interface to monitor and control individual PID loops

#27 Krellan opened 1 year ago
12
pidloop in phosphor-pid-control is running significantly slower than expected

#26 gauravgandhi70 closed 1 year ago
7
the sensors reading on plugable boards issue (valid sensors detection method proposal)

#25 huangalang opened 1 year ago
9
Add new class of PID loop for using power/wattage as input

#24 Krellan closed 1 year ago
6
Add temp-to-margin conversion in margin PID loops

#23 Krellan closed 8 months ago
9
Add support for Derivative (the "D" in PID loop)

#22 Krellan closed 1 year ago
2
Need Redfish equivalents to our IPMI extensions

#21 Krellan opened 2 years ago
4
Introspect failed at xyz.openbmc_project.Hwmon.external

#20 manojdesd opened 2 years ago
0
The problem when a fan set as input to multi zones, and the problem about read path configuration

#19 harveyquta closed 1 year ago
1
Cannot set dual-rotor with one PWM

#18 alice-jabil closed 2 years ago
2
Create a feature to allow fans to run at failsafe PWM when in failsafe mode

#17 brandonkimbk opened 3 years ago
1
Cannot output 2 pwm signal in one zone

#16 minimada closed 3 years ago
7
Why Fan do PID process again before output the pwm?

#15 chineweff closed 2 years ago
3
Passive D-Bus sensor built from json got incorrectly scaled

#14 kunyi731 closed 4 years ago
0
Remove sensor nonexistence protection

#13 hank93304 closed 5 years ago
0
loggingEnabled checking should be done after parsing arguments

#12 kunyi731 closed 5 years ago
0
Check single fan fail

#11 YHLiang85 closed 5 years ago
0
FR: separate tuning and logging

#10 kunyi731 closed 5 years ago
2
Add stepwise parser

#9 hank93304 closed 5 years ago
1
Sensors with timeout 0 are always in failsafe mode

#8 mgersh closed 5 years ago
0
Use dbus active read for thermal sensors

#7 mgersh opened 5 years ago
4
Add info logging

#6 mgersh opened 5 years ago
0
dbus sensor read path configuration

#5 mgersh opened 5 years ago
1
sdbusplus exceptions! -- need to add try/catch if we want to fail nicely

#4 pstrinkle opened 5 years ago
0
Expose PID coefficients and values over dbus

#3 pstrinkle opened 5 years ago
3
If a sensor is unavailable, try again

#2 pstrinkle opened 5 years ago
1
Package build errors

#1 thinhp opened 5 years ago
1