-
Hi. I'd like to read raw data on a specific port for a more fast digital input from this port.
My intention is to decode an ir signal with code, but `digitalRead(IRpin)` (IRpin = a fixed pin) is too …
-
change the the names of the boards to match the official names:
- keep **LaunchPad with MSP430G2xxx**
- replace StellarPad by **LaunchPad Stellaris with LM4F120H5QR**
- replace TivaPad by **LaunchPad …
-
I am using Energia 0101E0009 for Windows with a Stellaris Launchpad LM4F120H5QR.
When I select the Tools menu, it takes approx. 15 seconds before dropping down with the options. And then everything …
-
The second valued passed to `sprintf` (here, `number2`) isn't taken into account on MSP430G2553 while it is done correctly on LM4F120H5QR:
**Results**
`sprintf(buffer, "%i.%i", number1, number2);` g…
-
## Summary:
- `SPI=SPI2` and `SPI1` work fine
- Issues with `SPI0` and `SPI3`: **MISO** not ok, even with pull-up resistor or with `digitalMode(pinMISO, INPUT_PULLUP)` as suggested in the [Stellarisit…
-
The library for the Anaren CC110L AIR BoosterPack is compatible with the StellarPad LM4F.
```
#if defined( __LM4F120H5QR__ )
// Select the correct SPI port to interface with AIR Booster Pack.
S…
-
If ADC conversion is done using "analogRead(2)" or "analogRead(P6_5)", the value obtained is not correct- it is as if the pin is not connected to anything.
However, using "analogRead(A5)" it works as …
-
I am using Energia 0101E0009 for Windows with a Stellaris Launchpad LM4F120H5QR.
Goals is to use hardware pwm for multicopter esc control. With a loop delay of more than 100ms analogWrite looks OK on …
gompf updated
11 years ago
-
`__LM4F120H5QR__` isn't defined while all other MCUs have their own specific variable defined `__MSP430G2452__` `__MSP430G2553__` `__MSP430G2231__` `__MSP430FR5739__`
-
Please find [here](http://farm9.staticflickr.com/8204/8206072420_1ad13d63c6_k.jpg) a first **BETA** map of the pins of the StellarPad.
There are many questions concerning the UART, I²C and SPI ports …