-
Hi Kris,
I have been following your sketch for calibrating the magnetometer. My method is given as:
1- Move the MPU9250 in a figure 8 pattern
2- Take 50 samples of magnetometer's data
3- Plott…
-
Hi Kris.
We are building an application with MPU9250 to know drivers behaviour by getting G-force values of the accelerometer. However, the sensor will be in a car and the position could affect th…
-
Hey Kris,
Thank you for your code. I'm trying to implement it on my IMU. However, I have some questions about the magnetometer calibration and NED reference.
I read through the code for the cali…
-
Hello kris,
Actually your code was very helpful to me to understand about the SENtral Co-processor and the wiki gave me other very important idea about configuration files, algorithm comparison etc. T…
-
In a device without a built-in magnetometer/compass where does OM get the arrow direction?
This is the arrow in question:
![2](https://github.com/organicmaps/organicmaps/assets/1561878/5c3f0e08-30…
-
I can use Sphero BOLT's magnetometer value just fine in Sphero Edu App using getCompassDirection() in the JavaScript code in the app. But I can't find magnetometer sensor reading in this library. All …
-
Hello,
I am wondering if it is possible to get navdata concerning the magnetometer with libardrone.py ?
I am using an Ardrone2 with firmware version 2.4.8.
-
The Matek M10Q-5883 connected to the G747-HELI provides both GPS and magnetometer/compass (via the QMC5883L).
The problem is that once the magnetometer is enabled (yes, it works!) it interferes with …
-
Now that I've created the little sensor demo that visualises the sensor output it's clear more work needs to be done on processing the magnetometer.
From what I've read so far and understand so far…
-
Hello, I recently changed the IMU model from 3DM-GX5-AHRS to 3DM-GV7-AHRS.
Before changing the model, I used a code snippet like the one below to disable a magnetometer.
"""
mscl::HeadingUpdateOp…