-
Got a tft28 ver 2 3.0.2 firmware with makerbase Wi-Fi and ramps 1.4 Marlin 1.1.8
Port baud rate 250000
Prints fine from sd card.
When I send a print job from a PC or phone, the job starts and…
-
Platformio don't build this repo for my MKS Nano v 1.2 with TFT35 V 1.0
### Description Error
expression must have a constant value -- cannot call non-constexpr function "strstr" (declared at li…
-
https://github.com/makerbase-mks/MKS-SERVO42B
Quas7 updated
4 years ago
-
Hello, there is a MKS board Robin Nano V 1.3 STM32F407VET6, no firmware is loaded.Flash drives changed 5pcs.2 boards behave the same.
Bootloader flashed, did not help
https://github.com/makerbase-mk…
-
[makerbase-mks/armbian-build](https://github.com/makerbase-mks/armbian-build/) repo has 2 commits, but they do not looks like full sources for distributed [Armbian image]( https://drive.google.com/dri…
-
Hi makerbase, is there any PWM free pins are available in MKS Robin stm32 ?
Can any one help me on this ?
-
It looks like it used to be in Chinese but the encoding is incorrect now.
https://github.com/makerbase-mks/MKS-WIFI/blob/master/firmware_source/MksWifi/MksWifi.ino#L83
I want to know what the di…
-
Hi All!
Did anyone connect MKS PWS 3.0 board to Manta M5P? I found out how to connect and configure PW-OFF in this topic (https://github.com/makerbase-mks/Klipper-for-MKS-Boards/issues/18#issuecomm…
-
Mks robin nano v3.1 aldım. Hiçbir yerde nasıl yükleyeceğimizle ilgili bilgi yok. Vscode da yüklerden hata veriyor. Üretici kaynak dosyalarıyla yükleme yapılamıyor. Marlin 2.1.2 dışında marlin/scr/cor…
-
STM32F103 / STM32F407 boards BOOT0 pin should have *jumper* (or button) to VDD 3v3, and the pin should be resistor to GND. can use like 1k, 4.7k etc. or can jumper both sides 3V3, BOOT0, GND, so norma…