-
I'm able to compile ./colorlight_5a_75x.py --revision=8.0 and able to boot to the BIOS...
when I tried adding ethernet , it gives compilation errors..
**./colorlight_5a_75x.py --ethernet --cpu-ty…
-
Hi,
All these shields use digital interrupt pins 2 and 3 as part of data pins. Moving these pins to (e.g. 9 and 10) that are often used by SD card would free up interrupt fields for use with e.g. e…
-
Not sure if I should open this issue here, or on some other ULX3S repo...
I'm attempting to add the onboard SPI flash to the ULX3S board to enable my SoC to boot from flash (See initial WIP commit …
-
Not sure if I should open this issue here, or on some other ULX3S repo...
I'm attempting to add the onboard SPI flash to the ULX3S board to enable my SoC to boot from flash (See initial WIP commit …
-
Hi, guys , I have one Atmel sam4s-xplained-pro board, when I using the nuttx os find some issues. the built-in
![396333136](https://user-images.githubusercontent.com/321919/98649579-ba134100-2372-1…
-
When building for ECP5 FPGA using Docker images, I get the following error:
```
❯ make -f Makefile.synth
docker run --rm -v /Users/cdepaula/repos/microwatt:/src:z -w /src ghdl/synth:beta yosys -m…
-
I wored in SAMA5D4-xplained board to test iso7816 function using linux kernel 4.19, I used USART0 as 7816 port, add pin configuration as below, after kernel boot, it shew me "usart0-0: pin conf 2 mux_…
-
Hi,
Thanks for releasing your code! By the way, whether can you kindly offer results concerning about occlusion edge detection on PIOD/BSDS? For DOOBNet repo, they also offered this score.
Thanks …
-
Hi,
Thanks for your results about occlusion edge, it' s very helpful! In fact, I'd like to re-implement your work by pytorch as I'm not familar with Caffe. According to the architecture and your pap…
-
Dear David.
I'm having difficulty connecting a 4.3 'TFT on an SSD1963 controller to an Arduino DUE.
I have:
1. [https://ru.aliexpress.com/item/4-3-480-272-TFT/32920127970.html?spm=a2g0v.search0104.…