-
### Describe problem solved by the proposed feature
PX4 has PWM 50 -100 - 200 - 400 Hz values in the IO output. Apart from this Hz, adding higher Hz values such as 1kHz would be good for driving…
-
### Related area
gpio pwm
### Hardware specification
esp32-s3
### Is your feature request related to a problem?
pwm don't work in light sleep
### Describe the solution you'd like
pwm using upl …
-
**Describe the bug**
Fan curve is not detected properly. Fan2go does draw a curve, but at zero the fan is running. Hence it decides stop=min=max=0.
**To Reproduce**
Steps to reproduce the behav…
-
FPP 7.5 on raspberry pi zero 2w
When you enable PWM the pins stop working, but when you turn PWM off the pins start working
![PWM on](https://github.com/user-attachments/assets/1133dd0d-af…
-
### Wiki Search Terms
Set up config with laser and spindle
### Controller Board
XPro V5
### Machine Description
Workbee dual y with spindle rs458
### Input Circuits
_No response_
### Configura…
-
-
As of `v0.8.1`, the `GPIOPwm` class has a `dutyCycle` setter, but I can't find anything to set the frequency. Are there plans to add such a feature?
I checked the native code:
https://github.co…
-
Hello,
it works all very good, thanks for your script...
Could you still install PWM for all GPIO?
-
This issue is related to [PWM automation module](http://next.openhab.org/addons/automation/pwm/)
## Expected Behavior
Сhanges are successfully saved and the module continues to work
## Current …
-
https://https://rrorg.cn:521/archives/fancontrol
* 测试通过请跟帖回复,供大家参考.
* Please reply if the test passes for your reference.
## PWM
Motherboard | Sensor | Drive | Available | Other
---…