-
**Is your feature request related to a problem? Please describe.**
A clear and concise description of what the problem is. Ex. I'm always frustrated when I use an Electronic Speed Controller to contr…
-
I'm running fancontrol-gui via the snap package manager and thus need udev rules. The default udev rules from this github assume hwmon7 to be the correct one for PWM control:
```
SUBSYSTEM=="hwmon",…
-
Right now, the architecture of phosphor-pid-control assumes each thermal zone will have 2 cascaded PID loops:
* The thermal loop, to decide on the necessary fan RPM to keep the system cool
* The f…
-
I have 9 fans connected to my controller as follows:
Ch#1: 3 fans
Ch#2: 3 fans
Ch#3: 2 fans
Ch#4: 1 fan
I can pair correctly Channels # 1 to # 3 m but I get an error message on Ch#4 that the …
-
We noticed some boards can be working out of the thermal envelope and some others have a thermal behavior with fast/high amplitude.
Some of us did use a big fan powered by an USB relay which is not…
-
I was trying to use thinkfan on a Mint Linux machine using a Corsair Commander Pro for fan control. I was running into the issue that the service would not start up:
`ERROR: ~HwmonFanDriver: Resett…
-
Implement library and control to change fan speeds and servo motors by means of controlling I2C PWM controller (OutputControl Object).
-
Hello,
I'm trying to define Argon One fan in device tree to control it directly from kernel (get a native support without using any scripts in userspace). As far as i know, there is a lot of differen…
-
Hi There,
Is there a possibility to implement a plausi check, if a fan really follows a designated target curve?
I'm asking, because I have a buggy PCH Fan Controller on my Mainboard. Sometimes th…
-
### Is your feature request related to a problem? Please describe.
_No response_
### Are you looking for hardware support?
_No response_
### Describe the feature you want
Since 2.0.9.2 …
mcr83 updated
2 years ago