-
If i print a Job over the Serial connection via Repetier-Server the display is not switching into the 'Serial Print Job' Window. If i use Octoprint it switches with Repetier-Server not.
Any Idea why?…
-
### Description
A number of people have an XYZPrinting Da Vinci printer, and while it has a Repetier fork bouncing around, it's quite old now and the Marlin firmware would be a very nice upgrade.
…
-
Repetier-host 0.56 was working normally for several times. I've printed 2 objects. Then I force quited the program during slicing a big model. Now it hangs every time after it starts even before conne…
-
Repetier (for sure since 1.0.0, probably even before) and other firmwares support recovering from fatal errors by issuing M999 command:
* http://reprap.org/wiki/G-code#M999:_Restart_after_being_sto…
depau updated
6 years ago
-
**Is your feature request related to a problem? Please describe.**
After install of the appimage I've got messages:
```
The Slicer detected system SSL certificate store in: /etc/ssl/certs/ca-cer…
-
**Describe your Request**
- [ ] Release a PrintNanny + Repetier proof-of-concept.
- [ ] Send a review copy to PowerChaos for feedback
- [ ] Send a review copy to Repetier team for feedback
-
I have problem with homing axis , when sent Gcode G28 Y0 or G28 Z0 use Repetier host V2.1.3, I got homing Axis always on X axes , I use CoreXYZ printer type, are there there something wrong on my con…
-
Hi,
I'm trying to modify the repetier soft (running on Arduino Mega) in order to communicate with it through an USB - serial connection. My goal is to be able to send informations to the Arduino Mega…
Ecu84 updated
8 years ago
-
I am running version Repetier Host for Mac 1.1.0 and using Slic3r PE 1.41.3 to do the slicing. I have Slic3r PE selected as the slicer to use under the Slic3r Executable setting, however, when I go to…
kloon updated
5 years ago
-
Repetier-Host on Windows seems to be sending CR+LF line endings, which cause Teacup to reply with a double 'ok' acknowledgement. Which causes host to think the firmware is processing G-code much faste…