-
![02](https://cloud.githubusercontent.com/assets/23012115/19626178/36646f86-9966-11e6-8593-ae3df70176d4.jpg)
I have Tevo tarantula with BLtouch. So, I thought this is perfect firmware.
However, the s…
-
It's been asked a few times, but I have to insist again: When are you going to open the source and let us improve this firmware?
Do you realize that many of us are experienced programmers, members of…
-
Hi, When I attach the SKR3 EZ to my computer with a USB cable, I cannot communicate using YAT (among others) as no COM port is created. The indicator lights show that the RepRap firmware has been in…
-
### Description
Marlin 1.1.8, SCARA config, will not move or home individual axis, dead set on moving two motors and has a heart attack whenever an endstop is triggered. G28 rotates both motors i…
-
Is there a reason why the defined ramps calibrator pins dont contain the endswitch-connectors on the ramps board?
https://github.com/maxosprojects/open-dobot/blob/master/firmware/src/ramps/ramps.cp…
-
У нас появился 3d-принтер - Prusa-i3 (прошивка):
https://www.prusaprinters.org/prusa-i3/
https://reprap.org/wiki/Prusa_i3_Rework_Firmware/ru
https://github.com/prusa3d/Slic3r
Нужно его запустить…
-
### The problem
It's quite an evasive bug. If I do print this file it prints the 1st layer flawlessly. After that it frequently (like at least 2 times per layer) it hits the 100% processor mark (chec…
-
### Description of the bug
While installing version 2.7.4 on the Mac with an M1 Ultra chip, I was asked to select which printer I was going to use, I selected the Prusa XL 2T I have. A couple of st…
-
### What happened?
When using the RepRapFirmware flavor and enabling "Label Objects", both comment-format labels and M486 labels are generated:
```
; printing object 1x1 V Block.stl id:0 copy:2
…
-
So i have a adafruit neopixel ring around my hotend wich worked well untill i accidently shorted something while cleaning my hotend with a wirebrush, the neopixels went out, eventough the vccout still…