-
I have developed code using 5V pro trinkets that was able to send and receive data. I switched over to 3V Trinkets and am using the 3V and ground pin on the RockBlock.
Switching to the 3V trinket …
-
The status report message size increased beyond 50 bytes after the move to MAVLink 2 and HIGH_LATENCY2 message - it will consume twice as much credit as before.
That happened because the 2.5.0 vers…
-
I think this is the same issue that PaulZC reporton on 2/4/2018. the problem I am having is when I send a new message e.g. err = modem.sendSBDText(indata); it is not clearing something in a buffer so…
-
Build some sort of alert that system is nominally closed up and ready for use
-
RockBLOCK units can be managed by either the very simple and easy to use Rock7 portal OR through the Cloudloop platform. The can NOT be managed by both of the platforms at the same time. The Cloudloop…
-
@jtmolter
-
Hi,
I had this issue and would like some help
```
./udp2mqtt.py
WARNING 2021-11-10 16:12:52,944 __main__ open 41 : Opening UDP port 20…
-
Hello, I'm new to Linux and python, I'm learning them to use them for a school project with the rockblock, can you please go into a little bit more detail with the steps? I've installed everything but…
-
Would it be possible to implement some methods that would allow communications to take place with the use of AT commands over serial, SPI, etc. etc. In modules such as the Reyax RYLR405, RYLR406, RYL…
-