-
Currently these values are hard-coded into IonizationClustering.cc
These Xenon Gas properties should be set in OpticalMaterialProperties.cc, and IonizationClustering.cc get them from there. There i…
-
对于OpticalPhoton，判断其track status和step status，来决定改光子是否要Reemission,
flagReemission= doReemission
&& aTrack.GetTrackStatus() == fStopAndKill
&& aStep.GetPostStepPoint()->Ge…
-
In view of the benchmarking of the optical simulation we should implement a shared geometry:
- module size: 14×6×3.6 m³
- GigaSiPM size: 10×10 cm²
- Full wall coverage
- Photo Detection Efficiency…
dguff updated
2 years ago
-
CR detectors later on fall into a few categories, and they generally get bigger and heavier not lighter.
One big category has to be recovered, the emulsion type. They let you understand what actuall…
-
摘自邮件：
> 没错，测试的时候可以先关掉光学模拟。
> 我建议在软件中加一个选项，可以让用户自由选择分别打开或关闭闪烁光、切伦科夫光。
> 因为将来有很多模拟是不需要光学过程的。
-
Break on getting hit, on ADS and firing (because weapon recoil - larger caliber = more dmg), and over time in use.
-
Hi all,
Recently, I noticed a serious leak in memory when running my simulations.I noticed that the memory leak is caused by attaching a phantomSD to the voxelized geometry and it will be far sever…
-
When defining the emission spectrum (or re-emission in the case of WLS materials) as a function of the wavelength, Ratpac uses the spectrum defined in the RATDB file, but it converts the wavelength to…
-
-
有些物理过程可以先改变，例如弹性散射这块。
9.5中主要是LElastic有问题。即低能部分。