-
Hello
This may be the first of a serie of stupid interogations for setting up a master using CoE
I'm trying to start a cyclic communication with PDO read/write on an omron servodrive (R88D-1SN04H-…
-
Hi,
First of all, thank you so much for this component!
I have started seting up linuxcnc + ethercat after watching the video of MetalMusings: https://www.youtube.com/watch?v=NQ-HnrusGJo
He des…
-
In my installation it seems that some sensors have automatically created conflicting unique_id's. I am using powercalc now for a while with several releases.
Error in the logs is this:
Logger: hom…
-
使用Micropython I2C无法扫描到 ServoDrive 的ID,使用的是ServoDrive原固件
-
Hi there,
I'm quite interested in your project. I'm wondering if there is a way to use the Canbus which is already built into the Odrive and then use the CIA402 stack on the Odrive or SimpleFOC. I'…
-
Not really an issue but @Candas1 mentioned that this variant might be worth evaluating.
https://github.com/vamfun/Hoverboard-Hack-FOC-PID-Servo
I modified a fork to allow ADC inputs to PID con…
-
Hello, one question, have you gotten it to work the servodrive AX5203 and 5206 of beckhoff?
-
Hello,
I want to set up a connection between a Raspberry Pi with SOEM and an IndraDrive from Bosch Rexroth via EtherCAT.
Since I only need to set the position to which the motor shall drive, I tho…
ghost updated
3 years ago
-
**Describe the issue**
Modbus TCP/IP connector is being used. It shows that modbus connector is connected and Thingsboard Gateway is also connected. My device sees the correct function code and regis…
-
Hello,
Just wanted to know if there is a way to reset this issue or to let it show correct
im running grbl to sv500 servodrives with servos and this where my settings
$0 = 10 (Step pulse tim…