-
Hi all,
It appears, that on certain times a day my HA server is reporting the following error from the Integration:
```
Logger: custom_components.solaredge_modbus
Source: custom_components/sol…
-
I just acquired some very low cost second hand StorEdge SE7600A-US units and am hoping I can use my existing Chevy Volt Gen1 batteries with it. These units only officially support the LG RESU 10H (HV)…
-
### Discussed in https://github.com/WillCodeForCats/solaredge-modbus-multi/discussions/564
Originally posted by **mikedeluca** March 27, 2024
So I was digging around to try to figure out why s…
-
After installing the Solaredge App on my Homey pro I added this as a new device.
When I opened this new device (Inverter) I see a black side screen with no data @ all.
I checked the IP address off m…
-
Thank you for your work.
I've connected my inverter with home assistant and everything works great except...
When I change the number for the 'power control' it does work, but gets overruled by …
-
Hi rene,
I have a solar installation with a Solaredge inverter which worked just fine with your plugin. Yesterday we installed a Solaredge battery. The information we now get from the plugin (Watts…
JVRR6 updated
2 years ago
-
Thank you, your examples and codes helped me a lot.
I have 3 units in my system, and I tried to test communication with each of them using different unit values 1, 2 and 3. But only got respond for …
-
I own a SE5000E Inverter and tried using `semonitor.py` in active Ethernet mode.
My inverter gets its IP address from semonitor and then tries to resolve `prodssl.solaredge.com`.
That basically happ…
-
Hi,
I have a SolarEdge SE10000H inverter + SolarEdge battery. Currently, I have "Storage default mode" set to "Charge from PV and AC". When I set "Storage Control Model" to "Remote Control", then …
-
Hi,
I would like to add support for the Mynergi Libbi hybrid inverter and battery.
I have used the SolarEdge config and it seems to be working well but I have I have a few questions about some par…