-
Hi @MicroBahner,
Since many stepper motor drivers must be controlled by Open Drain output, it would be great to support this. Currently, I achieved this by changing some lines in the "src\utilities…
-
Hello everyone
I have two of the same stepper motors and 2x the same version of the circuit board. With a stepper motor, however, I have the problem that it vibrates extremely when driving.
The se…
-
Hi, I build your project. The project is really helpful, but I have an issue. When I input values in the Nextion display, The stepper motors stop for a second after every revolution of the stepper. It…
-
I have a fresh cloned repository (with all submodules of course), but I ran into some issues.
The goal:
- a 4-axis CNC with the btt skr mini e3 v2.0 board
- swap Y and Z axis, as the boards defaul…
-
### Wiki Search Terms
Axis setup, Testing movements, Testing enable motors.
### Controller Board
6x CNC Controller v1.2
### Machine Description
Gantry router XYZY, hardwired to DRV8825 drivers on…
-
Is it possible to get the technical data of the stepper motors and the manufacturer?
I would like to use the plugin klipper_tmc_autotune.
https://github.com/andrewmcgr/klipper_tmc_autotune/tree/ma…
-
#### Using `arduino-cli` and compiling with c++ compiler flags -O1, -O2 and -O3 appears to silently break the encoder angle reading.
#### Compiling with:
```bash
arduino-cli \
--config-file $PWD…
-
-
I mistakenly purchased 1.9 degree stepper motors for the x and y axis. As such, I'm having trouble getting the gantry to move properly with the code as it is written (gantry crashes into the sides whe…
-
This issue was automatically generated from GUI logs.file: Foraging.pyfunction: exception_hookline 4854logfile: DT300178/DT300178-A_gui_log_2024-11-01_10-35-23.txtboxes: 6D, 7D, 9Dcount: 3text: FATAL:…