-
Hello!
Thanks for the effort to start Lora on Esphome!
I try to get the code running, but it does not really work. I have Heltec Wireless Stick Lite V3, so the pins should be okay. Also I have a…
-
Hi
I am modifying SX126x-Arduino library to work with this core, but i need to work with Ticker in milliseconds, I have only been able to work in microseconds
https://github.com/ElectronicCats/S…
-
I am seeking assistance in the library GitHub to address an issue I'm encountering.
My challenge involves establishing communication between the Ebyte LoRa E220-400M22S and the MCU ATTINY804 IC. Be…
-
I'm using a DreamLNK LLCC68 915MHz SPI LORA module available from [LCSC](https://www.lcsc.com/product-detail/LoRa-Modules_DreamLNK-DL-LLCC68-S-915_C2894791.html) and I'm having trouble getting it to w…
-
The STM32WL series includes the radio IP from an SX126x with hardwired SPI on the die with a Cortex-M4 (and optionally a Cortex-M0).
Would it be possible to run this driver to use the internal SX12…
-
Hi! Is it possible that there will be support for the SX126x(especially 1262) chip? There is example for ping-pong comm between these chips but it would be quite difficult to implement lorawan into it…
-
Hi!
I try to get the library running on an RPi 3b+ with the 64bit OS headless. The board I am using is the waveshare board with SX1262 via SPI and GPS via serial.
When I compare the version if …
-
Hi,
the getStatus method isn't working due to wrong shift operation.
```
void sx126x_getStats(uint16_t* nbPktReceived, uint16_t* nbPktCrcError, uint16_t* nbPktHeaderErr)
{
uint8_t buf[7];…
-
-
I can use LLCC68 module to send data normally, but if I combine the receiving and sending code together, after the sending code is executed, the serial port will print the received garbled data
![企…