-
I am using ESP32, the same code with 0 modification was working just fine yesterday, since today morning I have been running into this error and idk what to do.
Error message displayed:
```
c:\…
-
Hi,
![image](https://github.com/user-attachments/assets/e46502f7-6377-4a4b-9689-8593ee48c39b)
What are the two parts used near the TMC2209? which can't be found on the schematic.
and the BOM …
-
Why marlin send error when power on printer? I use tmc2209 v1.2 uart by bigtreetech. I can't move any axis. When compile firmware not have error but printer can't move axis.
![71gFUlkZ0GL _SL1500_…
-
At line 873 in TMC2209.cpp:
if (reply_delay >= REPLY_DELAY_MAX_MICROSECONDS)
{
return 0;
}
The problem with this is that 0 can be a valid value. For instance, if reading Stall Guard Result…
-
How do i set the following settings for TMC2209:
```
0 microstepping
Interpolation true
SpreadCycle
```
There does not seem to exists SpreadCycle in the mode selection?
And if i set microst…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
I was setting up my tmc2209 with `sensorless_probing` and `hybrid_threshold` enabled, When I …
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
When activating a second Z driver and EDGE_STEPPING, the first Z motor grinds and loses…
-
Hi,
I used the tmc2209 successfully with an old esphome version and the following settings:
external_components:
source: github://glmnet/esphome@stepper-tmc2209
components: [tmc2209]
in t…
-
Hi! im trying connect btt exp mot with tmc2209 for a 2 x carriage but give me a error, need a tx and rx pin? please have any tutorial? thanks
-
### What feature do you want to see?
Like ercf, we could use sensorless (tmc2209's feature to detect tolerance) method to check if filament is inserted into extruder. (by checking stop of filament)…