-
Using ros2_master, USB Allied Vision 1800 U-1240c, Vimba 6.0. Each camera works separately. But when I try to run both simultaneously, only the camera started first will output. This behavior is also …
-
I have just done a fresh install of Raspbian and Motioneye (using the instructions at https://github.com/ccrisan/motioneye/wiki/Install-On-Raspbian).
When i go to add a camera no USB devices are sh…
-
## Background Info
Currently the PID's of each device is saved in a file in the logs/ directory. This is then read by stop_data_collection.sh to kill these devices.
## Description
For some reason…
-
Hello there,
I wanted to sync images from 4x daA3840-45uc cameras. The requirements are not that strict - I need only a single frame for each of them every 1s approximately. So I wanted to try a so…
-
When I was using the D455 cameras on a system, several cameras were burned out in succession. However, when I disassembled the cameras to check the circuit boards, I couldn't find any obvious signs of…
-
Prerequisites:
2 cameras, off course)
Steps:
1. Disable build-in camera.
2. Disconnect USB camera.
3. Lock screen.
4. Press Hello Face sign-in on lock screen.
Actual:
Message on the lock s…
-
Hello
Required Info |
-- | --
Camera Model | D435i
Firmware Version | 5.16.0.1
Operating System | Ubuntu 20.04.6 LTS
Platform | NVIDIA Jetson Orin AGX
Jetpack | 5.1.1 [L4T 35.3.1]
Kernel V…
-
tl;dr: it would be greatly appreciated if Zivid could make a CDI ([Container Device Interface](https://github.com/cncf-tags/container-device-interface)) spec available for USB-based Zivid cameras to f…
-
The Record3D app you developed is very useful and I appreciate it.
I have two questions while using your Record3D app.
**First**, I wonder if the USB streaming function can fix the camera's in…
-
to extend their life when not in use. A recurring case is when the west computer is offline, and the unit is operated only with the east side cameras. Another relatively common case is vanished USB ca…