-
Hello Benjamin.
Are you going to release Wand Schematics?
I have a wand and it's working pretty great, but I'm trying to compile the firmware and have some more buttons and bigger screen, having …
-
Starting this thread to see what's left to have the VESC implemented...
-
- [x] Fix footprint errors
- [ ] Get V2 fabbed
- [ ] Assemble V2
- [ ] Test V2 (requires #18)
-
In the readme of the vesc, it is stated that the batteries have a capacity of 5400mAh but in fact they have 5200mAh which also matches the picture of the battery.
Additionally a FSESC 4.20 is built …
-
We had a mishap a last week that killed two of our motors. It happened because I was making the arm move with brushed dc motors for the CDR, so the VESCs were configured for brushed operation. I forgo…
-
Hello, I am trying to compile the latest firmware on windows. I followed the install and build steps in the readme, but run into issues when attempting to run `make arm_sdk_install`. I get the follo…
-
In order to calibrate the dyno, we will need to be able programmatically control a [super-vesc motor controller](https://maytech.cn/products/maytech-superesc-50a-compatible-with-vesc-software) via the…
-
The VESC CAN'ids could be a ROS parameter here:
https://github.com/SubC-Partner/uavcan_ros_bridge/blob/16257c8cab1151528036a4c232c1e8363c7297c0/uavcan_ros_bridge/src/ros_to_uavcan_bridge.cpp#L54-L6…
-
Hi, I'm trying to run your motor_example.py, but I 'm getting the error "cannot import name 'VESC' from 'pyvesc'." Any idea why this may be? I believe I'm working in python 3, but I'm new to coding in…
-
I am trying to connect esp32 with a flipsky vesc, but cannot get esp to work. I connected it only through UART because I do not have CAN bus transceiver.