-
Hello,
I am trying to implement micro ros on a custom board based on the STM32L071C8T6 however I am running into this error:
`Description Resource Path Location Type
failed to merge target spe…
-
Hi
how to generate vfd.conf for x96Max plus **Ultra** s905x4?
VFD x96-max-1gbit-vfd.conf fror "x96Max plus" and "x96Air" don't work((
-
Hi,
i have this Beckhoff EL6751 CANopen Master/Slave communication channel.
I was hoping to connect CANopen VFD to it and somehow control VFD using LinuxCNC.
But I don't know how to configure it.
…
-
The basic version of PWM close loop pressure control.
_Originally posted by @black-top in https://github.com/DeeEmm/DIY-Flow-Bench/discussions/189#discussioncomment-11223082_
-
I have a Hitachi WJ200 VFD running my gantry mill. The closest input that the vfd will accept is a variable frequency PWM signal. I'm running TinyG2 Master and the SpindlePWM output is fixed frequency…
-
Quincey mentioned a prototype for stackable VFD's is partly done (~70%). We should assess its applicability to VFD work we need here for HPC enhancements and determine if it would be long term better …
-
I've found this version of the vfd with a serial driver included:
https://it.aliexpress.com/item/1005003334862374.html
Can it be used with this libray or does it need a rewrite?
-
I'm testing the following configuration option.
```
./configure --enable-parallel --enable-direct-vfd --enable-mirror-vfd --enable-ros3-vfd CC=mpicc
```
Test fails on Linux: https://github.com/h…
-
Support [Beckhoff EL6021 ](https://www.beckhoff.com/en-us/products/i-o/ethercat-terminals/el6xxx-communication/el6021.html) communication module.
It's a 1-channel communication interface for serial…
-
Hi @anpaza
Thanks for writing linux_vfd!
I have been trying without success to build linux_vfd for Linux 5.12 under Manjaro ARM. Should this driver work with recent mainline Linux kernels or do…