-
The connectors do not fit together. If this is expected it would be good to extend the instruction to trim the connector.
![IMG_1729](https://github.com/AlexanderKoch-Koch/low_cost_robot/assets/951…
-
I can no longer find version 2, or 3 waveshare boards and only can find version 4. In the description it says it is compatible with v3 and v2 but if I set my config.toml with v2 or v3 nothing displays…
-
The bug:
Waveshare 15.6 HDMI Full-HD screen does not work straight in Oram, unless the the USB cable carrying the touch data is disconnected and re-connected.
Context:
Customised display set…
-
Apologies ahead of time as I am not an app developer. I’ve just purchased a Waveshare ESP32S3 Dev Board complete with 1.28 inch Touch LCD and integrated QMI8658 6-axis IMU (https://www.waveshare.com/w…
-
Hello.
i am trying to make work the "en_speech_commands_recognition" example, but when the wake word detect the watchdog resets the esp, so i disable the watchdog, and now when detect the wake word s…
-
### Category
Other
### Hardware
Other
### Firmware Version
2.4.1.394e0e1
### Description
On the Raspberry PI version the time since seen does not change from "Never". You can see in the image, …
-
I have only just signed up to Github so am unfamiliar with their protocols, but...
I noted this project today and I see some admirable work developing this clock. I have been also working on an NTP b…
-
I'm attempting to use a Waveshare RP2040-Zero with hid-remapper and wanted to double check the pin outs when using it with hid-remapper as when I connect anything to my RP2040-Zero I don't see anythin…
-
I'm using the 7.5inch display, https://www.waveshare.com/wiki/7.5inch_HD_e-Paper_HAT. I've browsed through similar issues (e.g. https://github.com/GregDMeyer/IT8951/issues/18) and tried the following:…
-
Firstly, I'd like to offer a huuuuuuge thank you for what you are doing. Having the power and affordability (and availability!) of ESP32 chips with LinuxCNC has long been a wish of mine and it is grea…