-
The PRs from @xuminready has been merged which updates the source but no [new releases](https://github.com/parallella/parabuntu/releases) were published.
There is a [forum thread](http://parallella…
-
Hi hejiepn, I see that your code contains hssl start dma transfer,and I follow your case and official SDK code . But when every time Link-lists transfer begin, only tje first list can be carry to cor…
-
Hello,Thank you very much for the tutorial you provided.However my board may be different from yours.Here is the documentation for my board.
Explanation about the factory image without APT software.E…
-
Make sure you can see the pwm board on your RPi. See the following page, section "Testing I2C":
https://learn.adafruit.com/adafruits-raspberry-pi-lesson-4-gpio-setup/configuring-i2c#testing-i2c-27245…
-
Hi Andre,
I am currently following your tutorial on GitBook to learn more about implementing Machine Learning on FPGA. I have reached the section titled "Implementing DPU on SD card" and encountered …
-
Hello!
It's impossible to generate hpsdr receiver bitstream for this FPGA just using approach like for building bitstream for hpsdr transceiver (_make NAME=sdr_transceiver_hpsdr_122_88 bit_) becaus…
-
Hi Wenting,
it's great to see that you are still working on this project. After a long pause I'll be starting to tinker with EPD driving again(I'm planning to perhaps do some experiments using a simp…
vdp updated
11 months ago
-
I think it's time for an anchor issue to gather data for the Z-turn port since it is a very popular board.
-
Can this be ran on the Pluto Plus SDR? it's running the zynq 7010. Is it compatible/is it possible to port it if it isn't?
-
Hello,
-- question 1
I'm using this core with no problem at all on mine MYIR MYD-Y7Z010 development board (Zynq-7010 based).
Gigabit Ethernet it's provided by KSZ9031 connected as RGMII.
Even if…