-
I found new Parameter descriptions by tinkering with my
Alpha Innotec WZSV 62K3M Version V3.89.5
Channel 232: Vapourisation_Temperature (Celsius)
Channel 233: Liquefaction_Temperature (Celsius)
…
-
Since the update to the firmware version wp2reg-V3.88.0-9015 the values for the "Wärmemenge" und "Eingesetzte Energie" are no longer read:
luxtronik2.0 2023-01-21 10:48:53.092 error Couldn't handle…
-
Hello,
Thank you for your efforts. I have been futzing with my heatpump for ages and finally I have most of the modbus protocol working thanks to your integration.
I'd like to ask for two features…
-
Hello
First of all thanks for your work :)
I have managed to make it work in a duct machine, everything works except that the temperature of the room comes out as "Current Temperature: nan°C"
…
-
**Describe the problem you have/What new integration you would like**
I would like to have Gree AC with YAY1F1 remote to be supported for IR Remote Climate.
None of these available models work…
-
Hello,
probably this is mentioned somewhere so i apologize not finding it and asking here.
I have this values from my Vailant and dont really understand what they mean. I would like to add those sen…
-
### The problem
Logs are getting repeatedly spammed with error "[nibe.nibe.connection.nibegw] Ignoring coil 40940 value 84fc84fc - failed to decode".
I recently (2-3mo ago) started to use TCP/UDP …
-
Issue overview
--------------
In a setup with _WaterHeater:HeatPump:PumpedCondenser_ and _WaterHeater:Stratified_, the variables:
_Water Heater Use Side Heat Transfer Rate_ and _Water Source Side H…
-
Hey.
I got a Nilan VP18 heatpump, and your files works great for the most part - thanks for sharing!
One small issue I have, is that I can't seem to get the major, minor and versionrelease software …
-
Hi,
I have a WPC-07 pump with the following modules: WPM3i, FES, FEK, MFG, unfortunately ESPHome (2023.8.2) does not read most of the sensors. Is it possible to adapt the code to my pump? I tested t…