-
Hi! I thought you might like to know that I wanted to use this driver stack in ROS 2, and so I did a quick pass at converting it: https://github.com/pjreed/rr_openrover_stack.git (on the branch `dash…
-
First off, Great Job. This was a breeze to install and get running. It would be great if there was a more of a "now that you have your data, here's how to improve your tunning." For example: Gear Util…
-
Hi,
scanning my Koleos 2 reveals some "not found" and "not prefect match".
I have latest ecu database from december.
This is all only issue with ecu databsae ?
Found ECU [4WD] (no releva…
-
I'm working on a 4WD skid steer robot which uses ros control and the diff drive controller.
If I set my wheel radius multiplier to 1.0, the robot seems to go extremely slow (doesn't seem to be movi…
-
**Is your feature request related to a problem? Please describe.**
Took a while to sort out where the folder where profile.xml file is located.
The routino standalone router will look in the /u…
-
Questions:
1. I noticed that some of the resistors in the pictures are blue indicating that they are probably metal-oxide resistors rather than the "typical" beige (carbon film) resistors. Can I use …
-
By including the top gear of each car (cf. https://github.com/soong-construction/dirt-rally-time-recorder/releases/tag/v2.5.1), only a few pairs of ambiguous cars remain.
Most of these pairs can b…
-
For some reason, when I 'cd' to the data folder (Freenove_4WD_Smart_car_Kit_for_Raspberry_pi-master), and then to `Code/Server`, and run `sudo python test.py Camera`, it starts up, waits for a couple …
ghost updated
4 years ago
-
Hello Does anyone know which protocol this receiver uses and if I could use it with the Multi Module?
that would be great because it's a 3 channel receiver and the broken original control would only…
-
pwm
how to use pwm on pin 16
yahboom robot 4WD
motor pins
pwm 13 and 16 pins
https://github.com/YahboomTechnology/RaspberryPi-4WD-Car/blob/master/4.Code/python/CarRun.py