-
Hello, thanks for you hard work on INAV
I had a problem with the RTH and FS.
In the first incident, flying between mountains, I lost LOS and video signal and control.
At that moment I touched the R…
-
Enabling by `USE_DSHOT` in `development` 40f68610687a8ab0a944e78de8288cd38a0ce2c5 on Matek F722, compilint, and then setting it up breaks multiple FC functionalities:
1. Beeper goes on and off all …
-
I have 2 MPU9250 one is working fine and has id 0x71. The other replies with 0x70 as ID and its AK8963 acts strange - replies with 0 for the ID request "AK8963 is 0 should be 48" and then returns stra…
-
Hi,
I have the following questions.
1. When do you plan to do release 2 for PANS library?
2. If we use this core, can we send custom messages through UWB?
3. I intend to use IMU with a tag. It s…
afnan updated
5 years ago
-
Setup : ImmersionRC Vortex 230 Mojo stock
Configurator: 10.5.1
Firmware: BTFL 4.0.0
Target: IRCSYNERGYF3
I have a problem with my Mojo, since I've upgrade to BF4
I had no problem with 3.2 versi…
ChDUP updated
5 years ago
-
## Current Behavior
It seems that whenever I turn on led_strip my board doesn't not report battery voltage and current. Everything is configured correctly and the Leds are working fine. When I disa…
-
Tried to install everything and on iOS it works great. But on android I do not get sound at all.
I followed the steps for installation, tried to switch to Exoplayer, but still no luck.
This is wha…
-
Based on 62da4d09e687b14d3cb3c0153499d73003505adb
Using a Revo Nano to experiment, I used tethered logging to dump out the loop times and saw a lot of variation.
![image](https://user-images.git…
-
Kakute F4 V2 Can't arming
INav 2.0.0.RC6
In RC5 no problem.
In configurator, pre arming chekcs all item is green, but not arming.
Diff:
# mixer
mmix 0 1.000 -1.000 1.000 -1.000
mmix 1 1.…
PTaki updated
6 years ago
-