-
When using the internal module as the primary and the R9M external module transmitting to a 900 mhz redundant receiver, RSSI values do not seem to corralate with anything when doing a range test. It …
-
Hi,
Can the Frsky R9M Lite 2019 module be flashed with ExpressLRS? I am trying to use ExpressLRS with a TBS Tango 2 w/ PCB v3 + module bay upgrade.
TIA
-
I found a somewhat dangerous issue while doing thorough tests on the bench, fiddling with the OVERRIDE ARMING SAFETY feature (after I saw this video: https://www.youtube.com/watch?v=bWktM8WBV6k) on …
-
I just finished setting up ExpressLRS for my R9M and R9mm (I love the projekt ;-)) but somehow the telemetry is breaking up as close as 2m from the rx and gets lost completely within maybe 7m. Any sug…
-
Hello, I have an r9m system lying around and I'm thinking of flashing it with expresslrs. The question I have is does it support 2.4ghz mode? Or do I need to build a custom module for that?
-
Hi! I am a big fan of your work!
But I wanna know if is there somewhere a version that I can run on the PC, and if I can connect the R9M directly to the PC by a serial-usb converter.
I connected…
-
I have a Frsky X9D+ SE 2019 with a new R9M2019 and a R9MX Access RX. I'm running last version of opentx 2.3.9. All firmwares of both module and RX are the last one from Frsky site LBT mode (but i test…
-
"OpenTX 2.3.10-N355" farm cannot set the output power of the R9M-2019 (ACCESS V1.3) module.
The information screen of the module does not appear.
It works properly in OpenTx2.3.9.
- OpenTX 2…
-
After upgrading from 2.4 to 2.50 s-port is not more working. Tested for inverted and univerted pin receiver side. After downgrade it stars to run again normally on s-port pin.
-
Matek F405 CTR
R9mm Fport connected using "inverted Fport" pin https://ardupilot.org/copter/docs/common-FPort-receivers.html
Arduplane from https://github.com/yaapu/ardupilot/tree/frsky_telem_bidire…