-
### Feedback
I want to configure my energy dashboard as I have a new solar roof.
However, from this documentation page I cannot learn what type of sensor I should select for the PV production.
I ha…
-
Unknown temperature.
I was getting temperature with SunGather integration, however it was not correct, +15 degrees of actual. Not sure where's the issue.
 started exporting power. But in HA there is no inf…
-
### Discussed in https://github.com/mkaiser/Sungrow-SHx-Inverter-Modbus-Home-Assistant/discussions/93
Originally posted by **sirjacko** April 11, 2023
I installed a Sungrow SH10RT succesfully …
-
Hi,
another thing I have observed when playing with backup:
The inverter always supplies the SoC based on the value set in `sg_min_soc` and `sg_max_soc`.
Min SoC = 35%; Max SoC = 100%; Then the…
-
Hi there,
I have a SH5.0RS and SG5.0RS Sungrow inveter based setup. The SG reports all generated power as “load_power” which is interpreted as consumed, while all the export is reported by the SH i…
-
**Add Home Battery Control for Fronius Gen24**
Die entsprechenden Fronius Gen24 Register:
https://www.fronius.com/~/downloads/Solar%20Energy/Operating%20Instructions/42,0410,2649.pdf
![282263…