-
After quitting with ctrl+c and then launch mumudvb the tuner keeps polling
This is when i clean boot my server
sudo mumudvb -d -v -c mumu2.conf
Info: Autoconf: We update the channel CAM support
…
-
Instead of using the CAT connection, connect to the Flex radio via the TCP and UDP interfaces.
This allows finer control of the radio plus the ability to put spots and bandpass entries on the PamAd…
-
```
Which device (Samsung, Galaxy Nexus)?
Which firmware is installed? 4.01
What version of wireless tether are you using? 2.07
What steps will reproduce the problem?
1. Press to start tethering
2.…
-
The D878UV, which [appears](http://members.optuszoo.com.au/jason.reilly1/868mods.htm) to be the same hardware can generate an analog APRS message. Is the 868 capable of the same, and/or can the 878 fi…
-
I`m just discovering the existence of LoRa and have bought an RFM95 and connected the following pin-out
`
PI Port RFM95 Port
3v3 = VCC
GND = GND
GPIO10 = SPI_MOSI = MOSI
GPIO9 = SPI_MISO = MISO
G…
-
```
Which device (Samsung, Galaxy Nexus)?
Which firmware is installed? 4.01
What version of wireless tether are you using? 2.07
What steps will reproduce the problem?
1. Press to start tethering
2.…
-
I hope ELRS can use Telemetey Viewer App Android/IOS. Telemetry dta transfered from tx to smartphone via smarport + bluetooth module.
Like this: https://youtu.be/lmSMt6JLWL8
-
I have two squeeze box radios with stock firmware ( 7.7.3-r16676) with LMS version 8.3.0. Occasionally "Player Name" in the player settings is forgotten and reverts to 'nil'. I've not noticed this p…
-
Hello,
I'm testing with streaming music using a2dp over bluetooth on the Pi3. When Wifi is enabled, I get constant buffer underruns wit Pulseaudio (Blueman shows a downstream of around 34kB/s). As so…
-
OpenWrt 21.02.2, r16495-bf0c965af0 with WR802n v4 https://openwrt.org/toh/tp-link/tl-wr802n_v4
I have three of these devices and after some time, rarely a few hours, sometimes a day, mainly after …