-
Hi I am running out of ideas. I can not access the virtual SD Card. I already reinstalled everything twice.
Printer.cfg
[virtual_sdcard]
path: ~/sdcard
klippy.log
[virtual_sdcard]
path = ~/s…
-
Hi. I have problém with heating bed
If i set some temp heating stop 10 degree leds for example set 60*c hotbed stop heating 50 *c
But If i try calibrate PID heating is ok
Please help
Marlin fi…
-
Hello!
I am trying to change the filament using the M600 command without an LCD screen and an encoder. The way I want to do it, is calling other M commands when the printer asks for input.
I hav…
-
With 12 panels, with 3 chains of 4 panels of 128x64, I need the chains to be
128x256 (4 panels of 128x64 on top of one another)
I'm not sure the mapper function allows this, and if I go 4 panels wid…
-
This is Marlin bugfix-2.0.x branch, commit 61225e68, running on an SKR v1.3.
### Description
For a while, I've been having problems with my hotend staying... well... hot. At the beginning of a …
-
Using Debian Buster, Marlin at commit c28e08c8, running an SKR v1.3 with a brand new RRD 12864 display (BigTreeTech red PCB model with contrast pot, via normal cables that needed no twisting/flipping/…
-
### Bug Description
This is Marlin bugfix-2.0.x, commit 0ebd2f44, running on a newly-built Hypercube with SKR v1.4 controller (which has TMC2208's on X, Y, and Z, and A4988 on E) and RepRapDiscount…
-
```
Marlin/src/lcd/menu/menu_delta_calibrate.cpp: In function 'void _man_probe_pt(const float&, const float&)':
Marlin/src/lcd/menu/menu_delta_calibrate.cpp:42:76: error: 'DEFAULT_XYZ_STEPS_PER_UNIT…
-
right now i found (Horizontal S)
1 - 2-3-4-5
10-9-8-7-6
11..............15
**&**
1 - 2-3-4-5
6-7-8-9-10
11..............15
i want (Vertical Z connection)
1 6 11
2 7 …
-
1. do not insert sd card
2. slow lcd respond with 0.5 sec for each line refresh
3. insert sd card
4. it become normal operation
5. take out sd card again
6. slow lcd repsond again ...
Regards
…