-
# Steps to reproduce
## Prerequisites
Linux environment. `arm-none-eabi-gcc` toolchain, gcc version 9.3.0. QEMU with ARM emulation.
**NuttX commit:** 5b839061f960cadb3fda19a51679484b95f8d6e3
…
Oxore updated
4 years ago
-
**DoD:**
Successfully transferring dummy data from BBB to Tiva and vice-versa.
- BBB will send "hello " to Tiva, and that string will be shown on Tiva's terminal.
- Tiva will send "world!" to BBB, …
-
**DoD:**
Integrate the working codes developed for UART, lux sensor, capacitive sensor and GPIO along with shared memory to develop a single framework that can communicate with TIVA and handle data a…
-
**DoD:**
Working UART on Tiva checked using loop-back (board's Rx pin receives data sent from board's Tx pin).
**Status:**
Yet to do
-
**DoD:**
Ultrasonic sensor functionality check on BBB (sensor output correct values). Bring the Ultrasonic sensor near to an obstacle. Check if the sensor outputs the correct value for the distance b…
-
Write CAN transmission code to send from one launchpad to another through the external MCP2551 transceiver boards. Once this is working do the same for VCU to a launchpad.
-
**Porting layer**
- [x] Device Controller Driver (DCD)
- [ ] Host Controller Driver (HCD)
- [x] Board Supported Package (BSP)
- [ ] OS Abstraction Layer (OSAL)
**Description**
I do the vas…
-
DoD: TBD
-
Setup FreeRTOS on Tiva C-Series board.
Status: Acquirement of board pending
DoD: Able to create hello world task on Tiva and print data on terminal
-
**DoD:**
Create shared memory that can be accessed by 2 writer tasks and 1 reader tasks (writer tasks would be the sensor tasks (lux and capacitive sensors) and reader tasks would be UART Tx task). T…