-
I would like to get 3 of the boards, please. I am willing to pay you for your expenses and time on these, loaded with your custom firmware for the open mower project. I have also donated to your patre…
-
## Task Description
In reference to the [previous issue](https://github.com/icub-tech-iit/ipts/issues/17#issuecomment-1549239056) the BLDC motor codes (7117,7116) are supported in ipts from this rele…
-
Hello, I am using Brushless Frameless Motor 50BLF15, for this i am using this file and modify as motor requirement examples/windows/usb/PMSM_Speed_Control_Encoder_based.py . When i run program motor …
-
Hi guys, this is super cool! Thanks for all the hard work to make this project. I'm looking to simulate the following motor
https://store.cubemars.com/goods-859-RI100+KV105.html and a simple velocit…
-
I tried with keul uvision5 and st-link software. Keul gives error about missing packet (i installed GD32F130 package). St-link detect chip as some st version and start to flash it, but stops at beginn…
-
@RobertLRead reports that his effort to control the Sanyo Denki 24V Fan
with a motor controller board and by PWM is not working well.
With the PWM duty cycle set anywhere but near 100 % the fan doe…
-
great job for your code. but i have idea with this hoverboard, can i copy your code and flashing to singel board instead dual board master and slave? i want to use this board control bldc motor indivi…
-
### Variant
USART
### Control type
FOC
### Control mode
Torque
### Description
hello I have a hoverboard with two separate bldc control boards, I soldered stm32f103CBT6 48pin on them. this pro…
-
### Task description
During PI15 planning it came out that the motor testing suite is not complete.
We need to meet with @icub-tech-iit/proto in order to see which are the missing tests and plan t…
-
Hi Werner,
I've noticed a bit annoing behavior in FR34: it sometimes does not start compressor, when connected over 12V power. It gets then into strange state: the fan is working, power indicator s…