-
Hi
Thanks for the lib. it is awsome
I am using an Nano with the lib and a 128x32 I2C.
afaik this lib uses othe Timer0 and Timer2, could this be avoided or is it I2C
-
- Plugin Name:
- Plugin Version: 6.16
- OS Name: Windows 10
- OS Version: 10.0
- Java Version: 11.0.9.1
- App Name: IDEA
- App Full Name: IntelliJ IDEA
- Is Snapshot: false
- App Build: IU-203.7148.5…
-
I tried to make this library work with my esp8266 and it looks like it's not currently supported..
WARNING: library TMCStepper claims to run on avr architecture(s) and may be incompatible with you…
3ricj updated
3 years ago
-
Is it possible to somehow read a DHT11 with an ATMEGA328P running at 1 MHz? The reason the CPU is running so slow is because this is a battery operated project, thus I am trying to bring down current …
-
when timer 1 or 3 is in CTC mode, in the interrupt you have to load the comparison registerOCR1A (OCR3A), otherwise the desired time interval does not work.
//****************************************…
-
Step 12 of 'Disassemble and debug...' states
```
Notice that some capabilities are labeled with (sentry)
```
but I only see entries labeled `(sealed)` in the register file:
```
(gdb) info …
-
In wiring.c delayMicroseconds() function using SBIW and BNRE instructions for timing.
In AVR MCUs it takes usually 4 clock cycles while in LGT MCUs takes usually 3 clock cycles.
Therefore this funct…
-
I have created a simple program for creating four PWM outputs using timers 1 and 2. Any PWM output assignments made to TOCC0-3 result in constant HIGH state on the pins. Assigning them to TOCC4-7 work…
-
I'm trying to execute stall guard example on esp32, the simple example is running fine but there are errors with stallguard. Please help
`Arduino: 1.8.5 (Windows 10), Board: "MH ET LIVE ESP32MiniKi…
-
If step time is longer than 65536 ticks, the actual step time is not tick accurate. The longer the step time the less accurate it gets. This is because the step time is approximated using a period tim…